KTM EXC 200 2-Stroke

Click on the image to see my KTM EXC parts & kit

Over the years I've use a range of different products and custom parts, here I share with you my current favourites.

Please click around to enjoy this interactive image to learn about the products I'm currently using on my KTM EXC 200 2-Stroke.

Click on the image to see my KTM EXC parts & kit
Bell helmet Trail Tech kick stand Ride 100% goggles Leatt body armour Fox womens race kit Fox MX boot

Bell helmet

Light weight Bell helmet offering all the protection along with awesome graphics.

  • 3D-Formed Quick Snap Cheekpads
  • Flying Bridge Visor with Breakaway Screws
  • Overbrow Ventilation and Washable XT-2 Extended Wear Interi

See more at Bell helmets

Trail Tech kick stand

The Trail Tech kick stand is a direct bolt-on replacement for the OEM KTM kickstand and looks awesome.

  • Nice and firm with hardened Steel bushings that are substantially stronger and will not wear out
  • Larger foot pad provides more surface area for improved ground contact when you need it the most
  • Satin black finish provides a sweet factory look and enhances your overall bike appearance

Ride 100% goggles

Fab pair or MX enduro googles from Ride 100%.

  • Mega comfortable
  • Minimal steam up when getting sweaty
  • Great popping colours

See more at Ride 100%

Leatt body armour

Body moulding and impact absorbing 3DF body protection.

  • Slim, light fit that protects the chest, back, elbows and shoulders
  • Made of  3DF AirFit impact foam
  • Soft, flexible construction but protects your body by hardening immediately upon impact

See more at Leatt

Fox womens race kit

Super bright and comfortable Fox MX kit

  • Bright...
  • Comfortable
  • Available in a small enough size


See more at Fox Womens

Fox MX boot

Superb comfort and solid protection from Fox MX boots

  • Hinge Lockout stops motion before hyper extension
  • New Duratac Fox rubber compound provides improved durability and unprecedented grip on outsole and burn guard
  • A slim medial design keeps you close to the bike with the Duratac burn guard giving grip
  • Low ride chassis brings the foot lower and closer to the foot peg
  • Slim toe box for easy shifting and a slimmer overall profile

See more at Fox Racing

Super snug and comfortable knee / shin guard. They offer protection for impact and joint movement and are so comfortable I also use them snowboarding.

  • Hard shell and 3DF AirFit ventilated soft impact foam
  • CE tested and certified as impact protection: Knee EN1621-1
  • Anatomically correct, pivoting design

See more at Leatt


Model: KTM 200 EXC
Year: 2010
Category: Enduro / offroad
Rating: 74.1 out of 100.
Engine and transmission
Displacement: 193.00 ccm (11.78 cubic inches)
Engine type: Single cylinder, two-stroke
Bore x stroke: 64.0 x 60.0 mm (2.5 x 2.4 inches)
Fuel system: Carburettor. Keihin PWK 36 S AG
Ignition: Kokusan
Lubrication system: Mixture oil lubrication 1:60
Cooling system: Liquid
Gearbox: 6-speed
Transmission type,
final drive:
Clutch: Wet mDouble disk clutch, operated hydraulically
Exhaust system: Lubrication
Chassis, suspension, brakes and wheels
Frame type: Central double-cradle-type 25CrMo4 steel
Rake (fork angle): 26.5°
Front suspension: WP USD 48 mm fork
Front wheel travel: 300 mm (11.8 inches)
Rear suspension: WP PDS shock absorber
Rear wheel travel: 335 mm (13.2 inches)
Front tyre: 90/90-21
Rear tyre: 120/90-18
Front brakes: Single disc
Rear brakes: Single disc
Physical measures and capacities
Dry weight: 97.0 kg (213.8 pounds)
Seat height: 985 mm (38.8 inches) If adjustable, lowest setting.
Ground clearance: 390 mm (15.4 inches)
Wheelbase: 1,471 mm (57.9 inches)
Fuel capacity: 9.50 litres (2.51 gallons)